< back

Using LandTracker Maps


LandTracker Maps is a free product from LandTrack Systems, providing up-to-date maps and information about mining tenements in all Australian states. Live and Pending tenement data is updated from the relevant states' mines departments on a nightly basis. Dead tenement data is updated weekly and remains in the system for 5 days.

Please note that internet access is required to use this service.


Accessing LandTracker Maps

  • LandTracker Maps is accessed via a web browser on a mobile device, from http://www.landtracker.com.au.

  • Log in by clicking the button at the top right, and then enter your email address and password.


Obtaining a logon

To create a logon for LandTracker Maps:

  1. Click the button at the top right.

  2. Select the tab and enter your email address, your choice of password and accept the Conditions of Use.

  3. Click the button.
  • If you see a FAIL: Invalid Password message, this means your email address has already been registered for LandTracker Maps. Click the tab and reset your password.

Resetting your password

  • If you forget your LandTracker Maps password, you can reset it by clicking the forgotten link on the Login screen.

  • When prompted, enter your email address. You will then receive an email with a link to reset your password.

Using LandTracker Maps


  • Zoom in and out using the scroll wheel on your mouse, or using pinch gestures on a touchscreen device. The scale is shown at the bottom of the map.

  • Move the map by clicking and dragging with a mouse or using a touchscreen device.

  • Enter Full screen mode by clicking the
    button at the top right of the map, and exit by clicking
    or pressing Esc on your keyboard.


  • Click the Search button in the toolbar at the top of the screen to locate a tenement or area.

Search by tenement ID

  • To locate one or more tenements by ID, use the Find by ID tab.


  • IDs can be entered with or without spaces, and you can enter more than one ID separated by commas.

  • Select the Region (state), and then click the button.

  • The map will zoom to the tenement(s) you selected.

Search by location

  • To locate one or more tenements by location, use the Find Location tab.


  • Enter an address or location and then click . Note that you can search for any Australian address, although the address suggestion may not appear.

  • The map will zoom to the location you entered.

Understanding the map

Tenement information

  • When you hover your mouse over a tenement in the map, click it or select it on a touchscreen device, its details are shown at the bottom of the screen.


Colour coding

  • Colour coding is used to indicate a number of attributes of the tenements on the map.

    Tenement information is shown at the bottom.
    Tenement information is shown at the bottom.

    • Tenement(s) you have selected are solid colours and have a red border.

    • Live tenements are green.

    • Pending tenements are blue.

    • Dead tenements are grey, and remain on the map for five days.
      Note that the data obtained from mines departments outside WA does not include dead tenements. Therefore, when a previously available tenement is no longer in the data, it is assumed to have died and will have a status of Dead (was Live) or Dead (was Pending).

    • Where there are overlapping tenements, they are shown on top of each other. In the above picture, the darker blue near at the top right is two Pending tenements and the grey-green in the middle shows Live tenements in the same space as Dead ones. Right-click a tenement to hide it and expose the one underneath it to see its details.

Choosing what to show

Satellite or Map view

  • To toggle between the Google Maps Satellite and Map views. click the second button on the toolbar.

    • Currently showing Map view.

    • Currently showing Satellite view.

Surrounding tenements

  • To toggle between displaying or hiding the tenements surrounding the selected tenement(s), click the third button on the toolbar.

    • Currently showing surrounding tenements.

    • Currently hiding surrounding tenements.

Hide individual tenements

  • To temporarily remove a tenement from the map, for example, to show underlying tenement(s), right-click with your mouse.

  • To reset the view and show all hidden tenements, click the Refresh button.

  • Hiding tenements is not possible on a touch device.

Tenement labels

  • Toggle tenement ID labels on and off using the seventh button on the toolbar. Note that labels are only visible when zoomed in to 2km or closer.

    • Currently showing labels.

    • Currently not showing labels.


Other layers

  • The last button on the toolbar toggles a widget of additional layers.

  • Click the checkbox next to a layer to turn it on, and use the sliders on the right to adjust its transparency.


  • Click the next to a layer's name for information about the layer's content.

Exporting tenement map data

Export to Garmin GPS

  • If you have a Garmin GPS device that is compatible with the Garmin Communicator browser plugin, the fourth button on the toolbar can be used to download the polygons for currently selected tenement(s) to your device.

  • After clicking the button, a browser check is performed and you will see a link to download the plugin if it is not already installed.

Export to GPX file

Building a Tenement Map

To build a custom map of selected tenements:
  1. Turn surrounding tenements ON using the Surrounding toggle button.
  2. Select any number of tenements on the map by left-clicking them with the mouse.
  3. Turn surrounding tenements OFF by clicking the Surrounding toggle button again.

You will be left with a map displaying only the tenements you have selected. Try turning the satellite overlay and labels ON, and you have a very useful map view of tenements, which could graphically highlight a Project.

Custom Tenement Map
Custom Tenement Map

Viewing All Tenements in a Project, Combined Reporting Group or Other Group

To see a map of all tenements in a group, select View Groups from the Dashboard under the Groups section, select the group from the datagrid and then select its Map tab.

The map of a Combined Reporting Group will only show tenements that have been imported into LandTracker
Combined Reporting Group map
Combined Reporting Group map

Maps tab on Agreements

The Maps tab on an Agreement shows the Agreement's Related Tenements that have been imported to LandTracker.